For Clinique, the cost of an insert with a sample is three times that of a normal ad, according to Ms. Landau.
The second step consists of culturing the cells with their CM, after recovery from the beads, on a tissue culture insert with a porous membrane.
This article presents an innovative approach to joining the reinforcing insert with a glass-fiber-reinforced polyamide 6 (PA6-GF) bastructureure, where the reinforcing insert is molded into the PA6-GF.
To this they added a few alternate realities that a therapist could insert with a keystroke — a change from day to night, for example, or a switch from a deserted street to one where burka-clad shoppers strolled down the sidewalk.
In general, in order to develop a new cutting insert with a chip breaker, extensive time, research, and expense are required because several processes such as forming, sintering, grinding, and coating of products as well as different evaluation tests are necessary.
In this work a porous mold insert with a regular deterministic geometry was developed and its design was optimized by means of numerical simulations to maximize the heat exchange in Rapid Heat Cycle Molding (RHCM) between water and the cavity surface, without impairing the mold structural integrity.
In the case of a phantom insert with a uniform activity distribution (constant c i ), combining Eqs.
Quartz insert with a rectangular cross-section is employed to produce laminar flow in the growth zone and to suppress turbulence (Fig. 1).
Etching chamber (a) is composed of a base with a silicon wafer, teflon insert with a platinum electrode at the top and a special anti-corrosive seal at the bottom and a fastening ring.
The instrument was equipped with a gradient insert with a bore size of 9 cm (Resonance Research Inc, 770 mT/m, 2500 T/m/s), an amplifier (Copley 266), and a console (General Electric Medical Systems).
A cylindrical insert with a diameter of 5 cm containing a low density material with an average density of 0.3 g/ml was positioned in the center of the phantom to simulate lung tissue and provide a non-uniform attenuation distribution.
