Sentence examples for insert setting from inspiring English sources

Open image in new window Fig. 7 Schematic diagram of tool insert setting Vee-Block Table 6 Process capability indices S. No.

Insert presetting on the boring-bar is carried out with the help of a portable Vee-block insert setting gauge on the horizontal boring-bar.  .

This exercise is performed with the help of a test mandrel and a boring bar tool insert setting V-block22, shown in the Fig. 7.

Hence, it is concluded that among all the different causes enumerated in the causal matrix, the most influencing causes are those in Iteration 3, namely, the improper tool insert setting v-block, inaccuracies in setup changeover and undue machine stoppage.

From the ANOVA technique (discussed in detail in the Appendix 2) it is deduced that 73% of variability is due to the improper tool insert setting v-block, inaccuracies in setup changeover and undue machine stoppage.

Hence, from above Eq. (6) it is deduced that 73% of variability is due to the causes addressed in Iteration 3, i.e., improper tool insert setting v-block, inaccuracies in setup changeover and undue machine stoppage.

When time constraints would not allow the production crew to physically create the sets, computer-generated imagery was used to digitally insert set pieces into a scene.

Using an in vitro tool consisting of Ti/SiO2 disks in an insert set-up, through which molecules can diffuse from feed side to release side, a continuous release without initial burst effect of the antibiofilm compound toremifene is sustained for at least 9 days, while release concentrations (up to 17 μM daily) increase with feed concentrations (up to 4 mM).

Iteration no. 2 corresponds to the intermediary phase readings after performing moderate improvements like setting up a standard procedure for tool-insert setting on boring bar, cleaning the filter regulator lubrication (FRL) unit of pneumatic gauges and replacing the worn out cutting tool insert edge.

Inlay, in the visual arts, any decorative technique used to create an ornamental design, pattern, or scene by inserting or setting into a shallow or depressed ground or surface a material of a different colour or type.

Isolated symbiont reads were then reassembled using MIRA (Chevreux et al. 1999) with paired-end insert size set to 100 600 bp and normal quality settings.