Sentence examples for insert density from inspiring English sources

Overestimation of vBMDtrab increased proportional to cortical shell thickness and decreased proportional to insert density.

The most pronounced vBMDtrab overestimation therefore occurred in the phantoms with the lowest insert densities and highest shell thickness, where error was as high as 20 mg HA/cm3 (33%) in the radius phantom and 25 mg HA/cm3 (41%) in the tibia phantom.

Thus the SNR needs to be increased by log2e × 3 dB ≈ 4.328 dB when compared to the pure Rayleigh case to obtain the same amount of mutual information, provided the SNR is high.Turning now to the case of completely though linearly depolarized Rayleigh channel based on (14) we have to insert the density p f ( f ) = e − f π f (20).

To allow cell migration into injuried areas the polyester film was micromachined to insert high-density micropores through a Nd YAG laser ablation process.

The intensity of the image is varied either computationally or by inserting neutral density filters in front of the projector.

The light power P0 at zero degrees is measured by inserting a density filter and enlarging the camera aperture to 22 mm resulting in Ω = 0.02 sr.

The radiant exposure was adjusted by inserting neutral density filters in the beam prior to coupling the beam into the optical fiber.

HCCLM3 and HepG2 were pretreated with 0, 10 10, or 100 nmol/L bufalin for 48 h and then seeded into the upper insert at densities of 1 × 10 cells/24-well for HCCLM3 and 5 × 10 cells/24-well for HepG2 in serum-free DMEM.

Colour control consists of modifying the colour of the printing light by yellow, magenta, and cyan filters (typically by inserting high-density filters of these colours to varying degrees in the light path) to obtain a print of the correct or desired colour balance.

After plating the AECs on the culture insert at a density of 1.8 × 106 cells/cm2, the medium was changed every 2 or 3 days with fresh DMEM containing 10 % FBS for 7, 14, or 21 days, while avoiding contamination between the media in the upper and lower wells.

In additional, HUVEC cells were added to each insert at a density of 10 cells/ml/well in RPMI media.