Sentence examples for insert angle from inspiring English sources

The section area was the function of particle response angle, insert length, insert angle, and angle of the MGBF boundary plate.

As for the forward displacement of the needle tip, both of taper length and cantilever horizontal distance are significant, and the probing displacement of the needle tips could be validly adjusted by the factors of bending angle and insert angle.

This study provides a fundamental understanding for the pattern milling process, based on this, the influence of different milling process parameters on pattern geometry (including insert angles and radius) is discussed.

A second 2.5 cm incision is made (Fig. 3) through which the first cervical screw is inserted, angled at 135°, followed by three bicortical diaphyseal screws and finally the second parallel cervical screw.

The stress values are higher when the mini-implant is inserted at a 60° angle as compared to a 30° insertion angle.

The physical Mold orientation, the dimensions for each of the element in the Mold, the location of the gate, runner, requirement of insert, draft angle requirement, shrinkage factor, location of cooling channels were calculated using Pro Plastic Advisor.

As a leader of the conversations I distributed the key word and inserted new angles and comments.

Spines were inserted at angles to each other (typically ~30°) in order to facilitate slice identification (see below). Figure 2a shows the appearance of a spine on a haematoxylin and eosin (H&E -stained H&E -stainedgy slice at a spatial resolution of 1 μm/pixel.

The experiments were conducted at room temperature and the designed parameters included the insert length and angle of inserted plates in the bottom of MGBF.

In this work, effect of machining parameters cutting speed, feed rate and depth of cut, geometrical parameters cutting insert shape, relief angle and nose radius were investigated and optimized using Taguchi based grey relational analysis.

In the majority of cases the technique during surgery is to insert the variable angle distal row screws first according to the surgeons technique and to place them in the most appropriate subchondral configuration at the most appropriate depth whilst accommodating the variable fracture fragment configuration.