Sentence examples for inlet zone from inspiring English sources

A relation for evaluation of maximum film temperature rise in the inlet zone has been also developed.

The film thickness at the exit of inlet zone and at the entry of contact zone is common.

The diameter of the coal/char inlet zone is <10 mm which is very small compared to the height of the gasifier (4.94 m).

Metals and P were efficiently removed in both CWs, being metals retained mainly in sediment, and P was retained in sediment and plants of the inlet zone.

Other factors that inhibited oscillations were reducing the inlet zone length from 32 mm to 22 mm and changing the feedback channel orientation from horizontal to vertical.

Therefore, in order to compute minimum film thickness accurately at the contact, an efficient thermohydrodynamic analysis of fully flooded inlet zone has been carried out.

In this study, the steam reformer has a shell and tube configuration that is divided into the following zones: the inlet heat exchanging zone, the reforming zone and the exit heat exchanging zone.

Therefore, the amount of water and condensate droplets was significantly higher near the vane-type inlet diverter zone, while the mass distribution of the condensate and water droplets was lower in the other parts of Cases 6 and 7.

It is found that the baffle decreases the inlet recirculation zone and enhances the settling of solids by directing them towards the bottom of the tank with high velocities.

The reforming reaction rates at the inlet catalyst zone are considerably higher than the water-gas shift reaction because the last reaction became more active under a low temperature range; then, in middle of the catalyst zone it begins to increase because the temperature becomes low [9].

Wastewater, sediment and plants were sampled monthly in the inlet and outlet zones of both CWs.