Sentence examples for inlet thermal from inspiring English sources

First, the system parameters as net power, mass flow rate, pumps total power consumption, total evaporator exergy inlet, thermal efficiency and exergy efficiency are improved by changing turbine inlet temperature and pressure.

The measured junction to inlet fluid thermal resistances ranged from 0.44 to 0.32 °C/W for the 12 mm chip under the test flowrate range.

Furthermore, influences of refrigerant inlet temperature, thermal effectiveness of the cooling tower and condenser effectiveness on the performance of the wet cooling tower are also investigated.

The fiber assembly was then placed into the GC inlet for thermal desorption of the analytes.

So, it can be said that in the most interesting cases with higher solar potential and higher inlet temperature, the thermal efficiency enhancement is higher.

The effect of pile type, medium flow rate and inlet temperature on thermal performance is separately discussed.

Under different inlet pressures, the thermal performance as a function of the following geometrical parameters is studied: the length of the vortex tube, the diameter of the inlet nozzle and the angle of the control valve.

In this study, a solar parabolic collector with 3500 W of power for its application to Stirling engines was designed and analyzed (It is the thermal inlet power for a Stirling engine).

First-generation microturbines are based on the use of existing materials and proven technology, and with low levels of compressor pressure ratio and modest turbine inlet temperatures, have thermal efficiencies approaching 30% for turbogenerators rated up to 100 kW.

The effects of hydrogen addition, inlet temperature, wall thermal conductivity and wall thickness on the flame-wall coupling of the propane/air flames in a meso-scale tube are numerically investigated using a two dimensional model along with the detailed chemical mechanism.

The developed model is applied to a BIPV/T roof of an existing solar house with four simulated inlets, and the thermal efficiency is improved by 7%.