Sentence examples for inlet reference from inspiring English sources
Inlet reference velocity (m s−1).
For given (computed) thermal load distribution on winding and coil case due to nuclear heating only, helium temperature ∼4.4 K at the winding inlet, reference strand, and the most recent conductor and winding layout, the computed minimum margin occurs in pancake #7 at the peak field location and turns out to be ∼0.2 0.3 K above the design value of 1.2 K.
The basic performance of the CO2 hybrid collector is experimentally verified and reported by the manner for examining a reference CO2 inlet temperature condition to the hybrid collector.
An increase in fan inlet temperatures above this reference temperature will result in a decrease in the ACC performance below its design value, and a subsequent reduction in turbine performance.
Last week the city began a fresh effort to sell off the remaining condos, rebranding the cluster of 16 midrise buildings that once housed elite athletes as the Village on False Creek — a reference to the inlet bordering the development — and slashing prices by an average of 30 percent.
The test setup is able to produce similar velocity distributions at the runner inlet as that of a reference prototype turbine.
Porous type anodic oxide film formed on aluminum specimens was irradiated in solutions with a pulsed Nd-YAG laser beam through a convex lens to fabricate micro-channels, micro-electrode, and through holes (for reference electrode, solution inlet, and outlet).
The main characteristics of the CEA GFR concept are a 2400 MW core based on a ceramic pin type fuel as a reference, with an inlet temperature of 400 °C and an outlet temperature of 780 °C.
A sample of the gas in the head space was directed into the isotope ratio mass spectrometer, dried through a cold trap (−80°C) and analyzed in Dual Inlet mode against an internal reference gas.
Heavy knock was deliberately induced by adopting inlet air heating and a primary reference fuel blend of reduced octane rating.
To address this issue we implemented a reference electrode at the inlet of the negative half-cell of a 10 cm2 test cell.
