Sentence examples for inlet passage from inspiring English sources

Admiralty Inlet, passage of water located between Brodeur and Borden peninsulas and indenting for 230 miles (370 km) the northwest coast of Baffin Island in the Baffin region of Nunavut territory, Canada.

Moreover, a small closing delay prefers a large fuel oil inlet passage diameter.

Results show that the control piston diameter, fuel oil inlet passage diameter, fuel oil outlet passage diameter and their interactions are influential factors to the opening delay, while the fuel oil inlet passage diameter has the dominant effect on the closing delay.

A small control piston diameter together with a small fuel oil inlet passage diameter contribute to a short opening delay, however, they lead to a significant increase in the closing delay.

A brief lull in exploration occurred while the mess of guidelines laid from the ninth chamber was sorted out before John Parker progressed first to the large, dry, inlet passage of the twentieth chamber, and thence followed the River Axe upstream on a dive covering 152 m at a maximum depth of 152 m to the twenty second chamber where the way on appeared to be lost.

They also replaced the carburetors of 2012 models with responsive electronic fuel injection using larger-diameter throttle bores, revised the inlet passages and installed bigger intake valves.

Flow parameters at the passage inlet were focused on and each term in the radial equilibrium equation was discussed quantitatively.

The objective of this research work is to study the behaviour of flow at the inlet, within the blade passage and at the exit of a compressor cascade.

The influence of various parameters such as coil curvature ratio, dimensionless inlet temperature difference, dimensionless passage length of the coil, and fluid properties on avoidable exergy destruction have been investigated for water as working fluid.

A smaller tube is easier to insert because a better view of the laryngeal inlet is maintained during passage of the tube between the cords.

The cylinder block of the L-head engine is extended to one side of the cylinder bores, with the valve seats and passages for inlet and exhaust, together with the valve guides, formed in this extension of the block.