Sentence examples for inlet method from inspiring English sources

The cyclone separator takes tangential air inlet method to ensure the separation efficiency is no less than 99.5%%.

Load inlet method and set the sample chamber to 8 °C and injection volume at 5 μl.

6. Load inlet method and set the sample chamber to 8 °C and injection volume at 5 μl.

The chiral column is very sensitive to any changes in mobile-phase composition and, to ensure reproducible retention times, is it advisable to mix the individual solvent components of the mobile phase via the inlet method of the HPLC.

6. Set up the following gradient on the MassLynx inlet page: 0.0 to 8.0 min, 100% solvent A; 8.1 to 12.0 min, 50% solvent A; 12.1 to 20.0 min, 30% solvent A; 20.1 to 30.0 min, 100% solvent A. 7. Load inlet method and allow to equilibrate at 100% solvent A (initial gradient conditions) for 30 min.

6. Set up the following gradient on the MassLynx inlet page: 0.0 to 1.0 min, 70% solvent C; 1.1 to 25.0 min, 17% solvent C; 25.1 to 28.0 min, 0% solvent C; 28.1 to 35.0 min, 70% solvent C. 7. Load inlet method and allow to equilibrate at solvent C/solvent D (70/30; v/v) (initial gradient conditions) for 30 min.

The approximate integral analytic model is employed for adiabatic capillary tube, and the effective inlet enthalpy method is used to transfer the non-adiabatic capillary tube to adiabatic capillary tube.

The present work adopts an LES inlet condition generation method based on a rescaling/recycling method (R2M) and the Piomelli and Guerts SGS (PGSGS) model, which has the attractive feature of being independent of filter width (mesh size), but has not previously been used in combined boundary layer/free shear flow.

A novel Bump-integrated three-dimensional internal waverider inlet (IWI) design method is presented for high-speed inlet/forebody integration.

The results show that there is a considerable exhaust temperature rise (up to 65 °C) at aftertreatment inlet with the method and it is adequate for effective aftertreatment performance (Texhaust > 250 °C).

In its simplest form, the LVW method has inlet and outlet borehole locations that are static for the life of the system.