Sentence examples for inlet mean from inspiring English sources
To investigate the PAH formation process, the micro flow reactor was employed for a rich acetylene/air mixture at equivalence ratios of 4, 5 and 6 at an inlet mean flow velocity of 2 cm/s and gas sampling experiments were conducted at temperatures from 600 to 1000 K.
In the experiment for a methane/air mixture, four kinds of flame and soot responses to equivalence ratio (1.5 4.5) and inlet mean flow velocity (5 40 cm/s) were observed: soot formation without a flame; a flame with soot formation; a flame without soot formation; and neither a flame nor soot formation.
Testing condensing units in these conditions presents several drawbacks: difficulty to find a really infinite plenum and to avoid air shortcuts around the condenser inlet which means temperature variations, impossibility to measure the mass flow rate passing through the condenser.
The inlet boundaries use mean horizontal velocity values interpolated from regional tidal simulations and are perturbed by synthetic turbulence to accelerate boundary layer development.
The negative effect of inlet air temperature meant that when the coating process was carried out at lower air temperatures, a higher agglomerate fraction resulted.
The air was blasted in from the injection inlet by means of a blower, and the product gas was released from the outlet.
Open-air conditions mean that the fluid inlet and outlet are not pressurized.
Listing the belugas does not mean shutting down the economy of the Cook Inlet.
The mean velocity profiles, flow patterns, centerline velocity decay and mean vorticity profiles were then analyzed and compared among different inlet Re.
Unlike the equation, Fick's 2nd Law assumes steady-state condition which means constant inlet of chlorides from the surface chloride condition.
On the other hand, separating the condenser inlet and outlet plenums means a risk of not controlling the pressure difference between the two plenums and then overfeeding or underfeeding the condenser.
