Sentence examples for inlet in the first from inspiring English sources

All inlet channels were designed with a width of 70 µm with the exception of the water inlet in the first nozzle which had a width of 100 µm.

During heparin anticoagulation, plasma concentrations of MPO at the inlet increased in the first 10 minutes of CVVH (P = 0.024).

Viscosity of the mixture of 67% (in the first inlet) and 90% (in the second inlet) PEG solutions was measured to be 48.8 mPa s, which is 54.9 times higher than the viscosity of water (0.89 mPa s).

In order to keep similar water current speeds within the tanks, the inlet water was divided into two inlet pipes, where the first pipe created circulation in the tank with fixed water currents, while the second supplied the remaining water needed to obtain the required oxygen saturation for each tank.

The equipment also included a heating/cooling coil exchanger at the inlet of the first reactor.

The mock sample rehydrated the gold conjugate antibody in the first inlet, and PBS rehydrated and combined the gold enhancement reagents in the third inlet.

In the first case, optimum inlet molar flow rate, inlet pressure of the reaction side and temperatures of shell and tube sides have been obtained within their practical ranges.

Comparing the effects of pressure drop regulating approaches through the outlet and inlet of an orifice tube, the test results show that reducing the diameter of orifice in the first stage in the inlet or the sixth stage in the outlet of orifice tube can both increase the pressure drop.

In the first set of experiments, TTF solution was injected from inlet A and HAuCl4 solution from inlet B at flow rates of 30 and 370 μL/min, respectively, as demonstrated in Figure 1.

One µl of the sample was injected into the gas chromatograph inlet in the split mode at a 10 1 split ratio with the inlet temperature held at 250°.

Figure 5e shows mixing results for eight different viscosity values (50 100% PEG concentration used in the second inlet).