Sentence examples for inlet for the from inspiring English sources

However, it still remains a tough task to design the inlet for the time being.

For the inlet connected to the particle number size distribution measurements, the air is dried to RH <40%, whereas after the second inlet for the polydisperse CCN measurements, no drier is used.

Using an external gas inlet for the ECR region, intense beams of unpolarized 1H−, 2D−, 3He−, and 4He− ions are obtained.

Channels downstream of the flow-focusing junction were rendered hydrophilic by a treatment with a 5% (wt/vol) polyvinyl alcohol (PVA) solution16, which was flowed in the inlet for the outer aqueous solution for 5 min while blowing air into the other inlets to avoid contact of the PVA-solution with device regions upstream of the flow-focusing junction.

The first lid above the round tube had a hole which represented an inlet for the injected brine.

The flask was fitted with a magnetic stirrer, condenser, thermometer, and an inlet for the introduction of nitrogen.

A microfluidic channel with three inlets, including the middle inlet for sheath flow and two symmetrical tilted angle inlets for the cells were used to drive the cells through the channel.

Inlets for the rear brake cooling ducts were also integrated onto the side bodywork of the car, immediately behind the doors.

The air inlets for the PEM were placed over the shoulder strap so that they were close to the breathing zone when worn.

Air inlets for the pDRs were positioned in the backpack approximately in the breathing zone; for children who carried the backpacks, the inlets were attached to the shoulder strap and for the rolling backpack, the inlet was attached to the handle.

Table 1 Summary of the inlet conditions for the nozzles   Central jet Annular inlet Velocity (m/s) 0.66 1.54 Diameter (m) 0.025 0.028 Density (kg/m3) 1.225 Viscosity (kg/ms) 1.7894 × 105 Intensity of turbulence 12 7.5.