Sentence examples for inlet feed from inspiring English sources

Decreasing inlet feed and permeate temperatures difference, or inlet feed and permeate flow rates and increasing inlet feed temperature at constant temperature difference or inlet feed salinity cause the WPI to take place at lower number of stages.

In Fig. 19, the effect of the inlet feed velocity on the erosion is presented.

The inlet feed was fixed for each reaction as shown in Table 1.

The decreasing inlet feed temperature enhances the transfer of heat, eliminating the cold spot.

The possibility of enhancing reactor performance under forced cycling of the inlet feed was investigated for the ethanol to ethene dehydration reaction over γ-alumina.

An analytic expression for the wave interaction that transpires between the inlet feed conditions and the initial column conditions is developed.

Preferential liquid feeding occurred in the microchannels close to the inlet feeding tube for inlet flows with a horizontal header and upward flows through the microchannels.

Preferential liquid feeding occurred in the microchannels far from the inlet feeding tube for inlet flows with high gas quality (over 10%) and high gas superficial velocity (over 20 m/s) and with the inlet tube parallel to the microchannels.

However the reality for the owner and operator of the plant is that over the 40+ year lifetime of the plant the inlet feeds, production rate and operationally desired set points for each piece of equipment will change.

Continuous analytical solutions for the particle size distributions of char in steady and unsteady states in fluidized beds, when the inlet fuel feed is presented by monosize, lognormal, Rosin-Rammler or gamma distributions, are derived from a population balance model.

The model was subsequently employed in the design of axisymmetric, multi-aperture gas inlets feeding precursors into the reactor in an alternating (not well-mixed) fashion.