Suggestions(3)
Exact(4)
c Mesh model of the inlet face A A.
The mesh areas of the inlet face consisted of triangular cells.
The three-dimensional mesh model and the inlet face are shown in Fig. 7.
Similar(56)
The sampling frame was installed in such way that the Palmes tubes were permanently in a vertical position with the inlet facing down when inserted in the frame and the drip line of trees was avoided in all cases.
Inlet-face saturations (S w) of two samples were determined using Forbes methodology are plotted in Fig. 6.
The top face of the piston is designed to provide a deflector or baffle that directs the fresh load upward on the inlet side of the cylinder and then downward on the exhaust side, thus pushing the spent gases of the previous cycle out through the exhaust port on that side.
The concentration of dust on a double-shearer face was considerably higher than that of a face with one shear under the combined effect of wind speed on the face and disturbed wind around the shearer, while the dust concentration near the shearer on the return side was considerably higher than that on the inlet side.
We knew the fish were roaming the inlet we faced; he'd seen them there, but he left me alone and fished from the other side of the marsh.
Revuz et al. (2012) suggested that inlet, outlet, two side face and top clearances of the domain be 5H, 15H, 5H and 5H, respectively, from the edges of the buildings, where 'H' is the height of the building.
The law states that the rate of flow Q of a fluid through a porous layer of medium (e.g., a sand bed) is directly proportional to the area A of the layer and to the difference Δh between the fluid heads at the inlet and outlet faces of the layer and inversely proportional to the thickness L of the layer, or, expressed analytically, where K is a constant characteristic of the medium.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com