Sentence examples for inlet exit from inspiring English sources
The last stage is auxiliary to improve the practicability, mainly including an algebraic shape transition to regulate the inlet exit shape.
Not only did the two-dimensional tangential control jet improve the time-averaged pressure recovery at the inlet exit plane (13.3% at the lower half of the aerodynamic interface plane), it essentially eliminated the energy content of the distinct unsteady fluctuations which characterized the baseline flow field.
Finally, the CFD simulation results, for different Reynolds numbers and contaminant inlet-exit ratios (Fig. 14), are given and interpreted to explain the behavior of the imperfect mixing in Double T-junctions depending on the different entry parameters.
Results of parametric studies performed with the code indicate that, maximum airflow can be achieved when the inlet-exit area ratio is around 4 1, above which the system then approaches saturation without any real variation.
The absolute inlet and exit angles of the rotor, the absolute exit angle of the stator, and the relative gas densities at the inlet and exit stations of the stator, of every stage, are taken as the design variables.
Once the overall blade dimensions (inlet and exit diameters and blade height) have been defined, the blades are designed for a smooth entry of the water flow at the inlet and minimum water swirl at the exit.
The relative velocity of the fluid with reference to the blade at inlet (or exit) added vectorially to the (tangential) velocity of the blade must give the absolute velocity as seen by the stationary passages.
Figure 4 represents the performance curves for different combinations of the inlet and exit angles.
After that the geometry was changed for different inlet and exit angles, and different surface roughness.
The fluid temperature and pressure were measured at the inlet and exit plenums of the housing.
