Sentence examples for inlet case from inspiring English sources
Kowalik., Z. & Proshutinsky, A. Tsunami-tide interactions: A Cook Inlet case study.
Typical parts include inlet cases, compressor blades, disks, and hubs, as well as spacers and seals.
A similar horizontal flow pattern was also observed for our other horizontal inlet cases.
This paper details how transmission and insertion loss can be defined for the multi-inlet case.
The most promising mixture is an isobutane/pentane mixture which, for the 90 °C hot fluid inlet temperature case, achieves a 14.5% higher net power output than an optimized organic Rankine cycle using the same mixture.
The design of mixed flow pump impeller blades of high specific speed is applied with much higher magnitude loads for safe design as compared to realistic situation.In this work, uniformly distributed load (UDL) is applied to cantilever beam acting blades, with two different meridional annulus positions i.e. inlet inclined (case-I) & regular trapezoidal blades(case-II).
Test results show that the reentrant microchannels present significant augmentation in two-phase heat transfer in the large inlet subcooling cases and moderate to high heat fluxes, as their unique configurations play a significant role on the two-phase flow behaviors.
Next, numerical simulation was employed to investigate five different ACHs (ranged from 4 to 28) on indoor CO2 concentration for two different vent-inlet-size cases.
Comparing the results of Cases 6 and 7 (with vane-type inlet diverter) and Case 3 (with semi-spherical inlet diverter) showed that the mass distribution of the condensate and water droplets near the gas outlet of Cases 6 and 7 was less than Case 3. As a result, less liquid droplets are being carried into the gas outlet of these two cases.
In this special case inlet turbulence helped to equalize the flow over the channels.
