Sentence examples for injector performance from inspiring English sources
The injector performance was determined at different feed water temperatures, vacuum and water injection pressures.
The second study is related to the effect of hole geometry on injector performance.
Ongoing programs that target up to 0.5 A injector performance at emittance values consistent with the requirements of these applications, are described.
The simulation of the beam dynamics has been carried out with parmela with the goal of optimizing the injector performance compared to the existing model studied for the Conceptual Design Report (CDR).
The results show that there is an optimum area for the side openings, at which the injector performance will be the best for the given pipe and orifice-hole sizes.
In order to validate the feasibility of the proposed design and investigate the influence of structure parameters on injector performance, a simulation model is established based on Flowmaster coupled Maxwell.
In this work, we use numerical simulations to test and characterize injector performances for conditions corresponding to a 120 ton capacity electric furnace.
These data are used to analyse the factors controlling injector performances, to identify a most critical configuration of the injector in the furnace and to obtain a conservative estimate of the injection yield of carbon particles.
The sustaining or fracturing pressure equation derived from mass balance injector-production performance is given as Eq. 43 below rho c_{T} frac{partial phi P}{partial t} + rho nabla lambda P = i - q_{i} (61).
The impinging jet injector mitigated the performance instability and catalyst attrition that is favorable for large scale bipropellant thrusters.
The connotation is to realize digital real-time monitoring on single-well separated layer pressure and injection rate of injectors, network informationization of injection performance monitoring of blocks and reservoirs, and integrated reservoir and production engineering by combining injection program design and optimization with real-time adjustment of down hole separated layer water injection.
