Sentence examples for injection tubes from inspiring English sources

The rooms were full of odd, often sinister detritus: boxes full of Libyan and foreign passports, including blanks; a blue bag full of needles with injection tubes attached; surgical masks and gloves.

Studying the souped-up Corvette, Mr. Cuomo noticed that the motor had been fitted with different-looking fuel injection tubes and valve covers — carbon fiber parts, he observed, accurately, said Chris Tucci, 46, whose car restoration company in Lindenhurst installed the new motor.

Figure 18 illustrates an example of balanced flooding for a case where a single wellbore hosts both the producing and injection tubes, effectively acting as a point doublet.

The emissions and combustion characteristics were evaluated at 600 K inlet air temperature and 0.8 MPa pressure for two sizes of mixture injection tubes.

Two secondary mixture injection tubes with a flow deflector at the exit, extending into the primary combustion zone, were used to inject lean premixed prevaporized kerosene air mixtures of various fuel concentrations into the volumes of hot burned gas produced by the lean-burn primary burners.

The injection tubes allowed the food and stimuli to be introduced with minimal disturbance to the fish.

We have also introduced an Lead Bismuth eutectic injection tube to maximize the allowable proton beam current.

The cover of the reactor contains five inlets used for the stirring bar, the condenser, the temperature probe, the injection tube, and for taking aliquots.

From Figs. 4 and 5, it can be inferred, in Case 1, that the main feed gas went through the bed along the feed injection tube; thus, the volume fractions of the catalyst near the feed injection tube were relatively low.

A dual injection tube was proposed for a reduction of the lead bismuth eutectic (LBE) flow rate at the target channel.

When the dual LBE injection tube is employed, the LBE flow rate could be reduced by a factor of 7 without reducing the allowable beam current.