Sentence examples for injection ratio from inspiring English sources

Polar samples were analyzed by injecting 1 μl with a split injection ratio of 5 1; lipophilic samples of 1 μl were analyzed using a 1 1 split injection ratio.

The optimal amount of fat injected per unit distance that the cannula is withdrawn (injection ratio) is not known.

As the direct injection ratio is increased, both the PRRmax and IMEP decrease.

From the results, the optimum injection ratio yielding the maximum COP was determined for each cylinder volume ratio.

This paper proposes a 1D-analytical description of the injection ratio of a self-biased bipolar transistor under very high current injection conditions.

Starting from an expression of the current gain based on the stored charge into the emitter and base regions, we derive a new analytical expression of the current injection ratio.

We show that the noise spectral density is reduced setting up the injected laser at (i) low power injection ratios and using a low intermediate frequency or (ii) higher power injection ratios, a negative frequency detuning, and a higher intermediate frequency.

The sweep of the spark timing (ST) was performed for different pistons, SOI timings and direct injection ratios.

During the SFI hybrid heat release process, spark timing is effective to control CA50, IMEP and PRRmax regardless the piston shapes, SOI timings and direct injection ratios.

The model gives equilibrium mole fractions, specific heat of the exhaust mixtures and adiabatic flame temperatures and results for four different fuels and varying steam/water injection ratios are presented.

The effect of the stratified flame formed by different piston shapes, start of direct injection (SOI) timings and direct injection ratios (rDI) on the stoichiometric SFI hybrid combustion and heat release process was studied using the three-dimensional computational fluid dynamics (3-D CFD) simulations.