To start the engine, the liquid is injected under pressure into one of the cylinders.
Resin and catalyst are injected under pressure, followed by a period of heat and pressure; the pieces harden into rigid structures in minutes.
This is a highly automated process in which molten alloy is injected under pressure into a steel die, where rapid solidification takes place.
Both earthquakes occurred close to the bottom of a 9,200-foot-deep 9,200-foot-deep 9,200-foot-deep brine andisposalliquid welle from natural-gas where had been injected under pressure.
The waste, from the process called hydraulic fracturing that is used to unlock the gas from shale rock, had been injected under pressure into the well, which is 9,200 feet deep.
A 4.0 magnitude earthquake that struck Youngstown on Saturday occurred at a site that was almost identical to one hit a week earlier, a seismologist says — close to the bottom of a 9,200-foot-deep 9,200-foot-deep 9,200-foot-deepe from natural-gas wells hadisposalnjected under pressure.
The fibers are pre-stressed, and, subsequently, the resin is injected under pressure to fill the spaces between the fibers, giving them solid cohesion.
When the putty was cured the toothpicks were removed and epoxy was then injected under pressure through the tubes and into the cracks.
Liquid Composite Moulding (LCM) describes a family of composites manufacturing processes in which a liquid thermosetting resin is injected, under pressure, into a reinforcing fibre bed.
The cement, injected under pressure through the cannulation, is extruded through the holes to fill the spaces inside the osteoporotic cancellous bone, thereby increasing the purchase of the screw (Fig. 2).
