Sentence examples for initiation temperature from inspiring English sources

There is a rate-independent slip initiation temperature that decreases approximately linearly with stress.

The results reveal a significant decrease in the initiation temperature upon addition of NOx.

APN possessing amine functionalities reduced the cure initiation temperature from 310 °C (typical of pure phthalonitrile systems) to 180 °C.

Boron injection initiation temperature (BIIT) provides important information for the safe shutdown of the reactor using boron injection system during anticipated transient without scram (ATWS).

The results show that P AN-co-MHI), P AN-co-MHIM) and P AN-co-MHI) exhibit better stabilization than terP AN-co-ACBMtaining similar chemical comP AN-co-ACBMch as lower initiation temP AN-co-ACBMrger extent of standlization and smaller Ea.

The composition CuMoO4/TiO2 + SiO2/Ti has the most high catalytic ability; after twofold treatment (EP) of oxidized titanium surface, diesel soot oxidation takes place in lower temperature range (the initiation temperature of combustion, Ti = 270 °C) than powder molybdate sample (Ti = 340 °C).

By implementing a combinatorial approach that examines five initiation temperatures simultaneously, we have realized at least a five-fold increase in efficiency.

The addition of NO increased the conversion rate of alkanes and decreased the initiation temperatures for the reactions.

Comparisons of powders milled to times corresponding to percentages of their averaged TTR show similar reaction initiation temperatures despite the difference in total milling time.

In the case of as produced MWCNTs, the weight loss starts at 475 °C, whereas in case of modified tubes the weight loss initiation temperatures shifts to around 300 °C for acid modified and 230 °C for amine modified tubes.

While the analysis requires calibration to a shock experiment (the pop plot, for example), the results are a self-consistent set of realistic physical quantities that contribute to the shock initiation process including, initial temperature, chemical kinetics, a statistical description of the microstructure, and the hot spot size, spacing, and temperature.