Sentence examples for initial solid from inspiring English sources
Both of the investigated operating parameters, superficial fluidizing velocities and initial solid packing height, strongly affect solid circulation rate.
Complete degradation of temperature-responsive gelling systems took ∼100 days, independent of the DM0 fraction and the initial solid content.
The effects of operational parameters; acid concentration, initial solid content, reaction time, reaction temperature and mixing speed on sCOD and sSugar were studied with PBD.
All of the experiments were carried out with an initial solid content of 16.0% (w/v) and fermentation time of 120 h.
The effects of voltage, current, bed height, pH and initial solid concentration were examined, in terms of water flux per unit charge and energy of dewatering.
The hysteresis effect widely described in literature is also predicted, the initial solid holdup distribution (ε00s) is the main parameter to describe this effect.
Results demonstrate that increasing a material's degree of polydispersity can produce the same stiffening effects as increasing the initial solid-volume fraction.
Compacted powder films of UHMW-PE, prepared in a 1000-fold range of polymerization rates, were drawn by a two-stage technique; i.e. the initial solid-state coextrusion at 110°C followed by tensile drawing at 135°C, some 5°C below the melting point.
The 0.1 M NaH2PO4 extraction performed on the initial HMO and initial goethite resulted in 0.08% of the initial solid-phase Mn desorbed and 0.06% of the initial solid-phase Fe desorbed, respectively.
Reaction with 0.1 M NaH2PO4 results in release of 2.5 2.8% (mol-basis) of the initial solid-phase Mn of HMO into the aqueous phase and 0.1 0.2% (mol-basis) of the initial solid-phase Fe of goethite into the aqueous phase (Additional file 1: Figure S6).
The initial C:(Mn or Fe) molar ratios are derived from the DOC concentration of the leachate equivalent to the total C concentration within error and the initial solid-phase Mn or Fe concentration.
