for t>1 and with Y e ( 1 ) = 0, ∀ e ∈ E, to ensure initial rest condition in the network.
This contribution deals with the flatness based control of a gantry crane, where the control objective is to transfer the load from an initial rest position to a final rest position in a minimal transition time.
The optimal control problem of beam transportation from the initial rest position to given terminal states, in which the total mechanical energy of the system reaches its minimal value, is considered.
It was observed that the initial rest time before increase of shear stress during the time was decreased as the S/N and N/A was increased due to increase in the slag dissolution rate and more gel formation.
MIBI redistribution was defined as a decrease of 1 or more in the segmental defect score at the delayed rest image as compared with the early rest image in segments with reduced uptake at initial rest imaging [22].
Under open-circuit conditions, the initial rest potential (Er) shifted in the noble direction and the charge transfer resistance (Rct) increased, but after a few days Er moved in the negative direction and simultaneously Rct decreased, whereas the double layer capacitance (Cdl) and depression angle of the charge transfer semicircle increased.
Thorough analyses of bed expansion in flat- (FWBFB) and corrugated-wall bubbling fluidized beds were performed for a variety of wall declinations and operating conditions covering a range of corrugation angles, inter-wall clearances (C), initial rest bed heights (Hi) and ratios of gas superficial velocity to minimum bubbling velocity, Ug/Umb.
We can now study how the beetle adopts to the light if we keep repeating the flashing sequence shown in Fig. 2. Each series to be repeated has 100 sec recorded data starting from rest (0 10sec), flashing light on (10 40sec), flashing light off; insect relaxation (40 70sec), and arriving to the state similar to the initial rest stage (70 100sec).
Images collected during this initial rest epoch were not included in the image analysis.
The detector readings shown are normalized to the first 30 seconds of the initial rest period.
Briefly, the testing protocol consists of an initial rest period (minimum of 3 min) and staged exercise.
