Sentence examples for initial concentrations for each from inspiring English sources

Kinetic modeling (and stochastic modeling) requires detailed kinetic parameters and initial concentrations for each component in the network, which is usually not available for all the components in the network.

Four contaminant parameters must be provided: a) initial concentrations for each species/group, including environmental concentrations; b) direct uptake rate parameters for each species/group; c) concentrations per biomass in immigrating organisms; and d) metabolism/decay rates for each species/group.

The desirability function (DF: 0.9853) on the STATISTICA version 10.0 software showed that the optimum removal (99.832 and 99.423% for MB and BG, respectively) was obtained at pH 8.0, adsorbent mass 0.024 g, sonication time 4 min and 9 mg L−1 initial concentration for each dye.

The initial concentration for each standard from EQ. 3 is listed in Table 1.

Recoveries were determined as percentages of the measured desorption concentrations against the initial concentrations for 1-hydroxypyrene solutions at 10 μg/L (n = 3 for each).

Initial concentrations for Fe(II) were 5.65 76.5 mg/L.

The analysis showed that the greatest biosorption efficiency (>99% for both dyes) can be obtained at pH 7.0, °C24 °C, 24 h mixing and 20 mg L−1 initial concentrations for both MG and CV dyes.

The final Mg concentrations were generally less than the initial concentrations for all treatments except for the 70% maize stover treatment.

The initial concentrations for analysing the suitable isotherm model followed by all the four adsorbents are selected as 20, 50, 100, 150 and 250 ppm.

The initial concentrations for all modelled coagulation factors and other proteins are given in Appendix S2.

Initial concentrations for lipids under control conditions (i.e., no lipid addition) were set as explained for sub-model II.