Sentence examples for initial coating of from inspiring English sources

The conventional biomimetic apatite coating process can be accelerated by immersing substrates into concentrated simulated body fluid (5× SBF) at 37°C to form an initial coating of apatite precursor spheres, and transform the precursors into plate-like apatite structures.

Initial coating of MNPs (tFe(Co) = 0.05 nm) results in an increase of Ms for both sets of MNPs.

First, an initial coating of MNPs with the shells may lead to rapid changes of the magnetic parameters of MNPs, which is especially expressed in Fig. 8a, d.

An opposite tendency is the characteristic of Fe/Co tCo) MNPs; initial coating of Fe3O4 particles with CoFe2O4 shell (tCo = 0.05 nm) results in the sharp increase of Hc from 0.38 to 2.65 kOe (almost one order of magnitude).

For Co/Fe tFe) MNPs, the initial coating of CoFe2O4 core with Fe3O4 shell (tFe = 0.05 nm) brings about only slight changes of Hc it remains near 13.8 kOe for both uncoated and coated MNPs.

At Prada, she achieved a sensual, glossy, berry-tinted look by applying an initial coat of stain (CoverGirl OutLast LipStain in Plum Pout), followed by two additional lip colors (CoverGirl LipPerfection Lipcolor in Enchant and Hot), one after the other.

Mix your initial coat of drywall compound, or mud, to the consistency of sour cream.

You can brush with or against the grain during the initial coats of finish.

For example, use a paint roller for the touch ups if you used a paint roller for the initial coat of paint.

At the initial coating stage, low dosage of MPII ion flux helps in surface activation and ion mixing.

For both sets of MNPs, initial coating (tFe(Co) = 0.05 nm) leads to the rapid increase in Tb.