Sentence examples for inhibited system from inspiring English sources

The inhibited system contains optimum concentration of CR, ST, and PS peel (1.5 g/L).

The effective protection of AA in inhibited system was investigated using scanning electron microscopy (SEM) and atomic force microscopy (AFM).

No noticeable shift occurs in the values of anodic and cathodic Tafel constants in inhibited system as compared to blank.

The deviation in the values of Bode slope and phase angle in the presence of inhibitor suggests the capacitive performance of the inhibited system [34].

Higher values of apparent activation energy for inhibited system may be due to the formation of a physical barrier to charge and mass transfer created by adsorbed inhibitor molecules.

The linear polarization resistance values (R p) are higher in the inhibited system compared to the blank, meaning that lowering of corrosion rate occurs due to the presence of inhibitors.

It was found that Ea values for inhibited systems are higher than those for the uninhibited systems (Table 2).

The value of E a for uninhibited system is 33.6 kJ/mol which is much lower than the values for inhibited systems such as PS (65.9 kJ/mol), ST (54.1 kJ/mol), and CR (53.9 kJ/mol).

A diagram is also observed with the help of AFM technique for both uninhibited and inhibited systems, as shown in Fig. 9a d, which is made along the lines marked in corresponding Fig. 8.

The unavailability of phase equilibria data, an appropriate electrolyte model, and an associative equation of state as well leads to various problems in predicting the properties of aqueous associating fluids and inhibited systems.

Thermodynamic predictions of gas hydrate phase equilibria for polar hydrate formers and inhibited systems (e.g., NaCl, KCl, CaCl2, and also methanol, ethanol, Ethane-1,2-diol) are of major concern because of the large errors in fluid phase equilibrium predictions.