Sentence examples for inhibited solution from inspiring English sources
It can be explained that the maximum value RCt and also the most efficient inhibition is at 1,500 rpm in the inhibited solution that is attributed to enhance the mass transfer of the inhibitor from the bulk solution toward the metal surface (Jiang et al. 2005).
The results of polarization and EIS measurements for mild steel in the inhibited solution in hydrodynamic conditions showed that maximum inhibition efficiency was at 1,500 rpm electrode rotation rate that could be attributed to enhance mass transfer of inhibitor species from the bulk solution to the metal surface.
This effect is however notably subdued in inhibited solution, which means that CS extract maintains its inhibiting effect at higher temperature.
From the Table 2, corrosion rate (CR) of the inhibited solution gradually decreases with respect to the uninhibited solution.
In other words, it had the reverse effect at the higher velocities than 1,500 rpm in the inhibited solution.
Compared with uninhibited solution, the increase of E a in inhibited solution may be interpreted as a physical adsorption [5].
In the studied temperature range (303 333 K), the corrosion current density increases with increasing temperature both in uninhibited and inhibited solutions and the values of the inhibition efficiency of PEIMPA decrease with the increase of temperature.
In the studied temperature range (298 to 328 K), the values of Rt decrease with increasing temperature both in uninhibited and inhibited solutions, and the values of the inhibition efficiency of carob seed oil increase with increasing temperature.
The evaluation of the Table 5 data shows which the corrosion current densities have increased in both the uninhibited and inhibited solutions with the increase in temperature, but the values of inhibition efficiency and also surface coverage was abruptly decreased at temperature 50 ± 2°C.
The value of λ is also higher for the inhibited solutions than the uninhibited one.
The values of n lies between 0.977 and 0.988 in the case of inhibited solutions.
