Sentence examples for indoor load from inspiring English sources

Coupled with dynamic indoor load and actual operation characteristics of heat pump unit, a method to calculate actual dynamic heat load input of GHEs was introduced and a calculation program was developed.

The purpose of this study is to provide basic information for the maintenance of the composite box girder bridge, in which the global behavior of the bridge is investigated using an on-site loading test, and also the slip behavior of the shear connector is investigated using a indoor loading test with a part cut out from the bridge.

Consistent sampling of active dust of known age and provenance (area sampled) also permitted the calculation of indoor loading rates (mg m− 2 day− 1 for dust and μg m− 2 day− 1 for metals) for the winter season (from 2007 to 2010) when houses are most tightly sealed.

Two air simulators were designed and used to simulate indoor heating load and outdoor design conditions.

The results show that wall-hanging air conditioning system can undertake indoor heat load and conduct good indoor thermal comfort.

The warmed roof passed heat to near-ground air and subsurface layers to impose a small indoor cooling load.

In particular, this paper draws from literature the effect vegetation-based microclimates may have on the vicinity of a dwelling, which may reduce the indoor cooling load.

The water vapour resistance of a vapour barrier depends on the use of the house (for general living or as a summer cottage) and indoor humidity load.

Its high moisture-holding capacity, however, can generate an appreciable heat-sink to push heat downwards and increase indoor cooling load.

In this study indoor humidity load, average indoor temperature, the thickness of a log wall and additional insulation layer, the initial moisture content of logs and the vapour diffusion thickness of a vapour barrier were varied and mould growth risk was identified.

The use of building materials with high moisture buffering capacity is a well-recognized strategy to moderate the variation of indoor moisture loads.