Sentence examples for indicating a superior from inspiring English sources

The AC shows higher heat transfer rates than the metal organic frameworks upon adsorption indicating a superior thermal conductivity.

Comparison with other models from the literature has also been made indicating a superior performance of this technique with respect to several other well established thermotransport models.

Although reorganization energies of three designed molecules are similar, CBP-OD has the largest hole mobility because of the larger transfer integral, which is even larger than that of CBP indicating a superior potential to be HTM candidate.

The proposed catalyst gives the smaller onset potential (1.450 V vs. RHE) and overpotential (277 mV) at 10 mA cm−2 current density, indicating a superior oxygen evolution reaction activity to commercial IrO2 catalyst.

The optimum NMC8 shows high specific capacitance of 201 mA h g−1 at the scan rate of 5 mV s−1 and with 83.21% retention after 3000 charge-discharge cycles at a high current density of 20 A g−1, indicating a superior rate capability and outstanding properties.

Coin type full cells with SPC as anode and LiFePO4 (LFP) as cathode (SPC/LFP) are assembled and tested, which afford a high reversible capability (161 mA h g−1 at 0.2C based on the mass of cathode) with a capacity retention of 96.8% after 100 cycles at 1C, indicating a superior cycling stability as compared to the previously-reported graphene/LFP cells.

Calculated d′ values indicated a superior performance for the DTFR over the DTF and DTM.

Nonetheless, higher water binder ratio and higher POFA content was found to concomitantly improve the flexural deflection capacity, which indicates a superior deflection hardening behaviour.

The obtained results indicated a superior efficacy of tested casearins against trypomastigotes of T. cruzi, with IC50 values ranging from 0.53 to 2.77 μg/ml.

A comparison of results through MTrL and MTnL techniques consistently indicate a superior quality of approximations via the transversal linearization technique.

The H3/E2 ratios were found to be superior to those of most metal nitride multilayers commonly used as protective coatings, which indicates a superior wear resistance for the present nanostructured coating.