Sentence examples for indicate the durability from inspiring English sources

Results indicate the durability of different CMAMs exhibit unique characteristics.

Therefore, the chloride diffusion process is frequently used to indicate the durability and service life conditions of concrete structures (Tuutti1982).

Follow-up data from Barrett et al.'s study further indicate the durability of gains made in CBT for pediatric OCD [ 26].

The results of both the tests were promising in terms of indicating the durability of the treatment and the reduction in the absorption properties of rubber.

The output performances of TENG and EMG under various rotation speeds are systematically studied and clearly demonstrated by installing the device on a balance car, which proves that TENG can be more effective for low-frequency (<2 Hz) energy scavenging and indicates the durability of the device can be largely enhanced with this structure design.

Results indicate the less durability due to copper oxidation for copper-plated fabric and low and non-homogenous conductivity for nickel-plated fabric because of weak coherence between particles and fabric surface.

The surface structure of the Pt NPs was characterized by transmission electron microscopy (TEM), indicating the improved durability of the Pt NPs deposited on the TiO2/CSCNT, i.e., the only slight increase in the particle size after the durability test (typically 2000 times' potential cycling at 10 mV s−1 in the potential ranges of 0.05 to 1.1 V and 1.0 to 1.5 V vs. RHE in 0.1 M HClO4).

These results indicate that the durability of wheels can be improved using bionic optimization methods.

The results indicate that the durability of slag concrete is acceptable, though slightly lower than that of conventional concrete.

The results indicate that the durability against chemical deterioration for LWAC incorporated to silica fume depends on the compositions of hardened cement pastes in concretes, while the durability against physical attack depends on the types of aggregates.

These results indicate that the durability of the newly fabricated electrocatalyst is quite high and the obtained high CO-tolerance and durability are important for the design of an electrocatalyst for DMFC applications.