Sentence examples for increasing mean pore from inspiring English sources

Increasing mean pore size at annealing temperature 500°C, decomposition corresponded with growth of powder particles.

Similar effects have been observed for cobalt catalysts supported on silicas with increasing mean pore diameters [14].

The fraction of viable cells attached to the CG scaffold decreased with increasing mean pore size, increasing linearly (R2=0.95, 0.91 at 24 and 48 h, respectively) with the specific surface area of the scaffold.

It could be seen that the average pore size of the fibers is approximately the same despite increasing the lumen liquid rate, while increasing the lumen liquid rate from 9 to 13 ml/min results in increasing the mean pore size of the hollow fibers, as depicted in Fig. 7.

It is reported that the surface roughness, contact angle and liquid entry pressure of PVDF membrane were increased while mean pore size and porosity decreased with increasing PVDF concentration in the dope from 12 to 18 wt%.

Removal of hemicellulose increased the mean pore size of the substrate and therefore increased the probability of the cellulose to be hydrolyzed [ 30, 31].

The treatment is found to increase the mean pore size by over 10%.

In an overall view, and based on the relationship of R35 and Rapex presented in Fig. 21, the reservoir quality of the Shajara Formation increases with the increase in mean pore radius corresponding to the apex and to that corresponding to 35% mercury saturation.

Meanwhile, experimental results showed that mean plateau strength of the foams was increased first and then decreased with increase in mean pore size.

After aging, a decrease in surface area and pore volume was observed, as well as an increase in mean pore diameter.

First moment analyses of the data revealed generally modest increases in mean pore water velocity (v) over time, indicative of decreasing water-filled porosity.