Sentence examples for increased hardness value from inspiring English sources

The Cr Mo N coatings showed increased hardness value of approximately 34 GPa at 21 at.% Mo, compared with 18 GPa for pure CrN.

The superlattice coatings generally showed increased hardness value and considerably reduced sliding and micro-abrasive wear compared with TiAlCrN and CrN.

As the Si was incorporated into Ti Cr N coatings, the Ti Cr Si N coatings showed largely increased hardness value of approximately 42 GPa than one of 28 GPa for Ti Cr N coatings.

Microhardness of the coated samples showed increased hardness values before and after heat treatment.

The transient thermal waves produce a recast layer on the machined surface with heat-affected zone causes for increased hardness values.

It is claimed that the friction is the major reason for the increased hardness values under low loads and the ISE is related to the surface area-to-volume ratio.

The use of spraying technique enhanced flow properties of the prepared mixtures, increased hardness values, decreased friability, and improved homogeneity of the final dosage form.

It can be seen that the removal of hardness decreased with increasing hardness values (Bina et al. 2009).

Incorporation or increase of B increased the hardness value.

As the number of focus shots increases from 15 to 25, the energy density of ions rises, making the deposited films coarser and therefore increasing the hardness value.

This might also explain the increased enamel hardness values that have been reported compared to conventional acid etch protocols with self-etching priming adhesives due to partial reincorporation of mineral into the bond [17, 19].