Sentence examples for increased gear from inspiring English sources

* Twin turrets with two machine guns, thicker armor, slightly lengthened hull, improved engine access, increased gear ratios, better engine cooling, improved suspension, and other minor detail changes.

Incorrect shimming will lead to increased gear wear or failure.

A grinding undercut large radius hob was used for gear grinding to increase gear root fillet, and improve the impact resistance and bearing capacity of gears.

The method was applied to the unbalance response analysis of a 600 kW turbo-chiller rotor-bearing system, having a bull-pinion speed increasing gear.

The use of a speed increasing gear box enables the specific speed to be increased and therefore resulting in higher efficiency and less complexity than would be obtained with a multistage compressor design approach.

Although energy efficiency and payload can be increased by increasing gear ratio of the actuator which supports gravitational force, at a same time vertical velocity of the foot is decreased and resulted low tracking performance in vertical direction as shown in Fig. 17.

The goal of this study was to examine the coupled vibration characteristics of a turbo-chiller rotor-bearing system having a bull-pinion speed increasing gear, using a coupled lateral and torsional vibration finite element model of a gear pair, and to provide the mechanism of the characteristic changes.

The pure inertial load was experimented with the use of an intermediate gear drive which increased the gear ratio to 7.43 : 1 [ 125].

Plunge shaving may be used to apply surface modifications with the purpose of reducing noise and vibration by the predesign of favorable functions of transmission errors, and modify gear tooth surfaces to avoid edge contacts and increase gear endurance, safety, and service life.

A transfer case further increases the gear ratio for continuous low-speed travel in first gear.

Fibers embedded in the molded skin surface increases the gear tooth profile form and lead form deviations. Non-alignment of fibers across the gear tooth section increases the tooth thickness, tooth-to-tooth spacing and radial runout deviations from design values.