Sentence examples for increased compressive stress from inspiring English sources

It was observed that during creep, residual stresses in the composite are altered to some extent which results in an increased compressive stress in the matrix upon cooling and a subsequent increased stress required to form matrix cracks.

By further increasing the heating rate, the system becomes more disordered and has an increased compressive stress.

Simultaneous improvements in hardness and toughness were attributed to the densified microstructure with refined grains and increased compressive stress.

These investigations show that the adhesion can be improved by a specific etching procedure, which cause increased compressive stress in the coating-near the substrate region.

Owing to –1 ≤ cos 2β ≤ 0, σ3–σ1 < 0, the larger of β, the greater of (σ3 – σ1) cos 2β/2, and then the greater of σ, cracks are closed more tightly with increased compressive stress.  .

In the substrate, significantly increased compressive stress of 400 ± 60 MPa compared to 90 ± 30 MPa in the as-deposited state was observed only after blasting with the globular medium and relaxed fully after annealing.

Traditionally, increased compressive stresses on weight-bearing joints due to increased body weight and fat mass is thought to influence obesity-associated OA progression [ 55].

The saturation magnetostriction (λs) increases with increasing compressive stress and reaches 1680 × 10−6 under 25 MPa.

During the formation of amorphous LixSi in the outer layer of the nanoparticles, an increasing compressive stress up to 0.3 GPa is built up in the Si core.

The variability of the results generally decreased with increasing compressive stress level, and at highest stress variability was lower than under variable force/stress.

The changes in the sign of deflection are well accounted for in terms of the combined effects of the increasing compressive stress development due to the substitution of chloride ion for oxygen vacancy and of the increasing tensile stress development due to the cation vacancy accumulation at the metal/oxide film interface with increasing chloride ion concentration.