Your English writing platform
Discover LudwigSuggestions(5)
Exact(6)
Any further increase of the working width (more than 4 6 m) or the coupling of conventional additional apparatus is expensive, complex and time-consuming.
It is obvious that with the increase of the working temperature, the response of the sensor increases first and then decreases with a maximum value of 30.3 % at 125 °C.
Furthermore, after Ti-doping, the relaxation energy during lithium deintercalation decreases owing to the alleviation of Jahn Teller effects, while the contribution of oxygen atoms to the redox process increases, resulting in the increase of the working voltage.
In our experiment, we found that the hydrogen sensing properties of the Ni-doped TiO2 nanotubes were enhanced with increase of the working temperature.
The results of Raman spectra and X-ray photoelectron spectroscopy (XPS) indicate the sp3/sp2 ratio is decreased with the increase of the working pressure.
The corrosion results show that the corrosion resistance of the NiTi alloys is improved by the DLC coating, and the corrosion resistance of the DLC coatings on the NiTi alloys is decreased with the increase of the working pressure.
Similar(54)
Finally, it was observed that the increasing of the working temperature reduces the ability FFTs to absorb energy during compression test.
Meanwhile, the gas sensing response will be greatly decreased with the increasing of the working temperature and there is no response at 150 °C, resulting from Schottky barrier modulation.
The net effect tends to increase estimates of the working poor.
This metastable austenite then progressively transforms during straining, bringing about a large increase of the work hardening rate.
Tengstedt et al. [30] have found that both the PEDOT and PSS moistures of the PEDOT PSS film could be oxidized under UV-ozone treatment, which results in an increase of the work function of the PEDOT PSS film.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com