Your English writing platform
Discover LudwigSuggestions(1)
Exact(1)
Ejaculation, generally not visible, was inferred based on a rapid increase in thrusts and a pause just prior to the dismount, followed by intense genital self-grooming [45], [55].
Similar(59)
The increase in thrust force with depth of cut was relatively linear, R2 = 0.80.
The interlayer gaps gradually increase with the increase in thrust force but decrease with the clamping force.
The cavity mode is found to deliver a larger reduction in drag due to a substantial increase in thrust associated with the front surface of the cylinder.
The non-coaxiality first decreases and subsequently increases with the increase in thrust force, which can be attributed to the "tilt effect" in the lower layer.
However, an increase in depth of cut from 2 to 10 μm resulted in a 30% increase in thrust force, while cutting force remained constant.
During drilling, the build up of bone material in the drill bit flutes result in excessive temperatures due to an increase in thrust forces and torques.
For Strouhal numbers greater than 0.2, a degree of spanwise flexibility was found to yield a small increase in thrust coefficient, and a small decrease in power-input requirement, resulting in higher efficiency.
The increase in wear of the cutting edge of the SiAlONs and the WC Co tools causes an increase in thrust force, and consequently, in peel-up delamination, which are desired to be as low as possible in order to achieve high performance from the drilling tools.
Interestingly, the front flippers breaking the water did not affect the forward thrust force produced during a downward stroke probably because the increase in forward thrust always occurred well into the downstroke phase when the flipper tips were always below the water surface.
The experimental study showed that increasing the weight fraction of the B4C resulted in a considerable increase in the thrust force.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com