Sentence examples for increase in series from inspiring English sources

Furthermore, the influence of MoO3 in the P2 pattern is elucidated, displaying a substantial increase in series resistance and decrease in device performance.

It is suggested that this increase in series resistance is associated with the removal of carbon deposited in the non-electrochemically active region of the electrode during operation on dry CO, and that operation under load inhibits carbon deposition in the active region.

Noticeable increase in series and parallel capacitances from 50 to 138 F g−1 in 1 M Et3MeNBF4 and up to 155 F g−1 in EtMeImBF4, gravimetric power density (up to 35 kW kg−1) and volumetric power density (up to 25 kW dm−3, both at discharge time 3.6 s in 1 M Et3MeNBF4 + AN electrolyte) for optimised EDLC has been demonstrated.

However, this cell exhibited a reduction in FF due to an increase in series resistance locally.

As shown in Fig. 7a, there is a significant drop in the VOC with the increase in series resistance.

These defects can act as majority carrier traps which lead to a reduction of carrier concentration and an increase in series resistance.

All of the methods indicate a clear abnormal increase in time series of AOD data, 2 days prior to event.

The palladium complexes demonstrated high activity as precatalysts for the Suzuki cross-coupling reaction, which was found to increase in the series 6a < 6b < 6c.

Current-voltage characteristics exhibit a clear increase in the series resistance of the devices during storage under ambient conditions, and Spectroscopic Impedance analysis indicates that charge-transport resistance within the devices increases significantly during the degradation process.

The cut in rates the Fed has strongly signaled for its late-January policy meeting "could be a half-point," a move that would reverse the final increase in a series of six that ended in May; the first five were quarter-point moves.

The increase in the series resistance was possibly due to the high-temperature annealing damage to the FTO-coated substrates.