Sentence examples for increase heater from inspiring English sources

See below: Temperature: If too high, reduce heater settings; if too low, increase heater settings or buy a heater that's rated for your tank size.

The results show that the crystal growth rates decrease linearly with the increase of heater temperature at a fixed value of the crucible pulling down rate, and increase exponentially with the increase of the crucible pulling down rates at a fixed value of the heater temperature.

With the lowest boiling point among these compounds, the percentage of water released increased gradually with the increasing set heater temperature, to a final level of ca. 29% of the blend water content at 200°C.

The nanoparticle layer increases the heater surface wettability which was shown to be responsible for the observed increase in wait time between bubble nucleation events (thus lower departure frequency) and lower nucleation site density.

The main findings of the study relevant to the specific nanofluids studied are as follows: The nanoparticle layer increases the heater surface wettability which was shown to be responsible for the observed increase in wait time between bubble nucleation events (thus lower departure frequency) and lower nucleation site density.

It would follow that persons infected or at risk for NTM disease, e.g., slender elderly persons or cystic fibrosis transmembrane conductance regulator gene heterozygotes (8 – 13 ), consider increasing water heater temperatures.

The results of the study depict that the recycle ratio and the mass flow rate substantially increases the heaters efficiencies by increasing the fluid velocity.

An increase in sump heater power caused a pronounced increase in the circulating R32 concentration during the mixture tests, and the heating capacity increased markedly.

Collection of samples at multiple point-of-use outlets in each building, in addition to water heater samples, increased detection of colonization within buildings.

As a combustor became smaller, its thermal efficiency as a heater increased and its NOx emission decreased, while the emission of CO increased.

The micro heater increases temperature to activate the sensing materials which react gases.