The case when the middle leg inclines backward, i.e., has the same inclination angle as the hind leg's angle, is investigated similar to the previous case; an inclination angle θ inc is used to represent the inclination of the legs.
Disk plows usually have three or more individually mounted concave disks that are inclined backward to achieve maximum depth.
The preliminary results of this investigation show that a cylinder inclined backward gains energy from the flow more easily than a cylinder inclined forward, resulting in a larger galloping amplitude for the former cylinder.
The legs are arranged so they are inclined outward, i.e., the front leg is inclined forward and the hind leg is inclined backward to mimic climbing arthropods such as ants, cockroaches, and spiders.
Fig. 9 Optimal body legs inclination curves for a number of middle legs positions when a the middle leg is inclined forward, b the middle leg is inclined backward.
Fig. 7 The normal force distribution on the legs of the robot for different legs' inclinations and different middle legs' positions on a the front leg, b the middle leg and c the hind leg, with the middle leg inclined backward.
The upper support initially inclines backward to exert resistive force on the chest and is then released via a mechanism that pulls tension levers downward.
The halteres are inclined backward from the transverse axis of the fly's body at an angle of about 30 degrees that results in non-orthogonality of the two flapping plane.
The fixation steel plate at the end inclines backward 10°, which conforms to the physiological property of lordosis and is longer than the steel plate at the end so that steel plate can closely adhere to the front surface of centrum at the top and the system can be reinforced on the three points, equaling to providing a good postoperative stability.
Midway of the slope between the bridge and fort were the spectators a single company of infantry in line, at "parade rest," the butts of the rifles on the ground, the barrels inclining slightly backward against the right shoulder, the hands crossed upon the stock.
Both aeroelastic tests and pressure measurements were performed on the cylinder with forward inclinations (inclined to the upwind direction), a vertical attitude, and backward inclinations (inclined to the downwind direction) in a wind tunnel.
