bThe sleeve was not fully filled with the grout, and therefore, inadequate bond strength was generated.
The connections with adequate bond strength exhibited ductility characteristics prior to failure (Fig. 8a), while inadequate bond strength endured a brittle failure (Fig. 8b).
These specimens reached the ultimate states at about 130 kN with a large displacement of about 30 mm. Figure 8b shows the response of the grouted splice connection when inadequate bond strength was generated in the sleeve (WBS-1, 2, 3 and 6).
members designed according to obsolete codes of practice are characterised by very different structural detailing, inadequate confinement, poor bond between smooth bars and concrete, so that very different post-yielding mechanisms compared to new constructions take place.
Expertly plotted and beautifully written, Seinfeld was, above all, a celebration of juvenility, a paean to the sense of community that can arise when a group of wholly irresponsible inadequates bonds over a shared scorn for/loathing of the outside world.
Probably, the furnace atmosphere used for sintering was inadequate, which resulted in excessive substrate oxide layer thickness and poor bonding (de Groot et al. 1998).
The UPR is a response to cell stress caused by the accumulation of unfolded proteins within the ER/SR due to loss of Ca2+ homeostasis, inadequate disulfide bond formation of nascent proteins by isomerases, or deficient protein glycosylation [ 49, 125, 126].
As mentioned earlier, if the processing conditions, i.e. weld travel speed, tool rotation, etc., fail to generate the required heat for bonding, inadequate material mixing and stirring can occur, resulting in the formation of tunnel defects (Grujicic et al. 2010).
The S.E.C. also brought an administrative action against Ms. Horler, charging inadequate disclosure on bonds issued by Nevada County, Calif.
