Sentence examples for in the coupler from inspiring English sources

Four high-power klystrons feed 128 guidelets at front coupler using hundred and twenty 3-dB power dividers including 3-dB power splitters in the coupler.

The estimated average values of the RF losses in the coupler are 130 W (respectively 46 W) for the inner (respectively outer) conductor in SW mode.

This model is applied to search for the optimal variable-fiber orientation in the coupler that induces the minimum adhesive hoop shear stress.

These four error sources are differential normal mode losses in the coupler, the backscattering induced noises, the polarization fluctuations and the optical Kerr effect.

The parasitic reflectance in the coupler, which depends on the propagation constant mismatch between the slow mode and the coupler mode, is lower than 0.6%.

Theoretical analysis shows that replacing the reflector WRR with a transmitter one is helpful to eliminate the effect of the different normal mode losses in the coupler on the resonance asymmetry.

An experimental and theoretical study has been made of the behaviour of a four-bar chain having a clearance in the coupler-follower bearing.

Sometimes two trains would not separate after coupling them, caused by moisture in the couplers.

But where were the washers, the lead-shield expansion anchors, the ground clamp, nail clips, the tube of silicon sealant, the in-line coupler, the 6-foot stereo audiovideo cable, the protractor and the 2 feed-through bushings -- all of which the video also inventoried?

This difference in value is related to the fact that, due to the fabrication errors in the RWG coupler, the coupling factor obtained is [ to ] dB (see Figure 2).

Processing of nonsubstantive colour films, in which the couplers are in the colour developer, is more complex because each emulsion layer is reexposed by appropriately coloured light and colour-developed separately.