Sentence examples for in order to avoid thermal from inspiring English sources

Plasma jet excitation had to be pulse modulated in order to avoid thermal damages of the polymer substrate.

When assigning processes to cores, TAS takes their temperature and cooling ability into account in order to avoid thermal stress and at the same time improve the performance.

The black nickel films were electrodeposited from a nickel chloride bath at pH 6.5 in order to avoid thermal stability issues related to the presence of sulfur.

Large flat tile assemblies require a sufficient soft and conductive compliant layer enclosed between tile and heat sink in order to avoid thermal contact loss of the assembly during heat loads and therefore minimising the tile surface temperature.

During the actual heating process, attention must be paid to the maximum temperature reached in order to avoid thermal degradation and decomposition of the material; for PVC, decomposition generally manifests as a dehydrochlorination process, which consists of hydrogen chloride production and, for commercial PVC, often starts at temperatures in the range 520 590 K, [14].

After 1 hr, the temperature and stir rate were reduced to 30°C and 200 rpm, respectively, in order to avoid thermal, as well as mechanical stress-induced aggregation or agglomeration.

The thermal compensation structure is designed in order to avoid large thermal stress because of different thermal expansions of the duct parts under various conditions.

The cold extraction was used to extract the oil from durian seed flour in order to avoid the thermal degradation.

In order to avoid possible thermal precipitation in the electrolyte solution and prevent possible overheating of the cell components, the electrolyte temperature needs to be known.

Cooling of the silicon detector together with readout chips and other electronic components has to be investigated in order to avoid the thermal runaway [H.-J. Ziock et al., Nucl. Instr. and Meth.

Our findings present the activation restrictions which should be taken into account in order to avoid the thermal degradation of the components, while at the same time could be used as design guidelines for similar geometries.