Sentence examples for in order to avoid hot from inspiring English sources

In order to avoid hot spot links, extra nodes in the network, i.e., dedicated relay devices, are introduced.

It is shown that the ratio of catalyst loadings for the two reactions is a key variable, which must be carefully adjusted in order to avoid hot spots or insufficient reactant conversion.

The influence of the operating conditions like feed gas velocity, temperature and composition are predicted to be significant and they must be carefully adjusted in order to avoid hot spots or insufficient methane conversion.

Another criterion was a large electrode distance in the corners of the electrode arrangement in order to avoid field hot spots and to minimize dielectrophoretic particle collection.

In order to avoid the hot spot at the bed bottom occurring in the conventional coal gasifier, and to reassign the oxygen distribution in the bed, a pair of embedded high-speed air jets was employed in addition to a bottom central jet.

Nor are Londoners paying much attention to entreaties to plan their travel during the Games in order to avoid horrific congestion at key "hot spots".

Male and female pedestrians tended to wear hats and parasols, respectively, in order to avoid excessive heat during the hot season.

Uniform distribution of flow in the channels is an important operation attribute in order to avoid channel dryout and the subsequent hot spots and possible device failure.

In order to avoid the unstable flow stress during the hot working of a newly designed ultrahigh strength stainless steel (UHSSS), we have constructed processing maps from the measured flow curves during hot compression over the wide ranges of temperature and strain rate using different instability/stability criteria.

According to Vinaccia, the Roman grid was oriented to also take into account the main directions of 'annoying' (cold) and 'unhealthy' (hot-humid) local winds in order to avoid their penetration into the urban spaces.

We found that the gas temperature should be above the Zn(g) condensation temperature in the hot region of the reactor in order to avoid oxidation of zinc vapour before it enters the quench unit.