Sentence examples for in current specifications from inspiring English sources
The experimental buckling strengths were compared with corresponding design values in current specifications.
The proposed model can potentially be employed to assess the defect limits found in current specifications for welded steel assemblies that utilize thick plates.
A re-examination of the data on which the size effect correction for welded tubular joints in current specifications is based has raised questions about its validity, especially for joints with greater wall thicknesses.
When used in conjunction with the effective width method they are shown to provide excellent agreement with tests of sections that contain edge-stiffened flanges in compression, thus removing the unconservatism in current specifications.
The results show a considerable potential for improvement in current specification approaches which utilize a simple interaction equation, as this typically results in conservative strength predictions.
However, ambiguities are found in the current specifications in determining initial Young's modulus of material, which may lead to different test results.
Results show that the relative fatigue strength of these joints as affected by changes in wall thickness, joint scale and loading produce a so-called size correction that is substantially different than that in the current specifications.
The chapter examines the appropriateness of web crippling design rules in the current specifications for stainless steel square and rectangular hollow sections that are tested differently from the four loading conditions specified in the specifications.
The purpose of this paper is to present the test results of aluminum alloy circular hollow section columns with and without transverse welds, and to check the accuracy of the design rules in the current specifications.
Beginning January 1 , 2010 measurements for the crosse shall include the following, in addition to current specifications: From the 1.25-inch measurement to the top of the crosse, the distance between the sidewalls of the crosse must be at least 3 inches.
Numerous deep underground projects have been designed and constructed in China, which are beyond the current specifications in terms of scale and construction difficulty.
