Similar approach was followed to find the volume fraction of CSH(S) in case of mixtures containing slag in addition to fly ash.
However, a greyish alteration of the paint surface ("ultramarine sickness") can be sometimes detected, but it seems that many factors can cause discolouration of lazurite paint layers, such as the oil degradation in presence of humidity [20], or the discolouration of smalt in case of mixtures [20, 34].
This slight change indicates a continuous solid solution instead of a two-phase mixture, because in case of a mixture, different groups of peaks of each phase would be present, and the intensity of those peaks would be the separate function of each phase's fraction in the mixture [4].
In case of dye mixture G. pulchella, P. monteilii and consortium-PG showed an ADMI removal of 78, 67 and 92% respectively within 96 h.
at T = 30 °C), the CO2 uptake is greatly reduced in case of CO2/H2O mixture and requires significantly higher heat of regeneration [8, 9].
In case of the mixture with gum arabic, a decrease is observed in the fluorescence attributed to the binding medium that could be explained by a quenching effect [41].
When the noisy speech is processed by HEQ then by SPLICE the improvement was 48.6 % in case of 64 mixtures and this percentage is decreased when the number of mixtures increased to 256.
On the other hand, extensive long term aging effects were measured in case of WMA mixtures.
The effect is more prominent in case of HPC mixtures as pozzolanic effect of SCMs takes significantly longer time to provide beneficial effect to improve pore structure.
However, in case of 64 mixtures, the improvement in the SER achieved in case of MST when the noisy speech is processed by only soft HEQ was about 50%% relative to the baseline.
Concerning possible interpretations of the material composition of the particles and the regions between them, we point out that the adsorption behavior of proteins, such as fibrinogen on hydrophilic hydroxyl terminate surface, was shown to be complex [36], and in case of applying mixtures of biopolymers the complexity may be expected to be even higher.
