Sentence examples for in bulk mode from inspiring English sources

Curing under mild conditions equimolar mixtures of sebacic acid and glycerol proved to lead to poorly crosslinked swellable networks, which hydrolyze easily in bulk mode.

The X-ray diffraction pattern was taken in bulk mode.

The composite was placed in bulk mode (to increase the challenge caused by polymerization shrinkage of restorative material) and a mylar strip was placed over the cavity.

The average values of measured thermal conductivity and thermal diffusivity in bulk mode and in anisotropic mode both in the axial and radial direction were found to be within measurement uncertainty and showed no significant anisotropy (Table 2).

Thermal conductivity values measured in bulk mode using the hot-disk method ranged from 0.92 to 1.14 Wm−1K−1 (Table 2 and Figure 4A), where the minimum value corresponds to the sample from the shallowest depth with the highest porosity of approximately 67% (Table 1) (the other three samples had porosities of approximately 45%).

Start the Application Other Updation option is also available Export Button used for Single Document conversion Select Officee files (word, excel & ppt) for  conversion Open MS Office files Choose destination path for saving converted files You can watch the office file conversion procedure on screen Conversion is completed Same process follow in Bulk Mode.

Interference enhancement affords the first observation of both the in-plane longitudinal and transverse acoustic bulk modes near the Γ-point of the Brillouin zone.

The Y\(\angle\ 36° cut of single crystal lithium niobate (LN) is advantageous due to a yield stress >50 MPa as well as low intrinsic losses in bulk length-extensional modes, the second mode of which couples minimally to the mounting points.

In fact, there is no graviton zero-mode in this case and 4D gravity is obtained by means of continuum bulk modes.

This paper presents a comprehensive analysis of support loss, the dominant loss mechanism, in center-supported micromechanical disk resonators operating in their radial bulk-modes.

Although the substrate generation/tip collection mode might allow the processes to be probed, this would require FcTMA2+ in bulk solution and this mode is characterized generally by a significant loss of spatial resolution.