Sentence examples for in a subassembly from inspiring English sources

Moreover an inlet blockage in a subassembly of a low power density LMR is analyzed.

This applies for SVHCs that exceed a threshold of 0.1% (weight/weight) in an article in terms of REACH, in a subassembly of an article [4, 5] or in its packaging.

In this study, the fire response of the single plate, the single angle and the double angle shear connections is investigated in a subassembly under a natural fire by using three-dimensional finite element models with surface-based contact interactions.

Further, the flow regime in a fuel subassembly varies from laminar (during shutdown heat removal under natural convection) to completely turbulent under full power condition.

A three-dimensional analysis is carried out here to estimate the heat transfer due to natural convection, in such an anisotropic, partially heat generating porous medium, which corresponds to the typical case of blocked flow in a fuel subassembly inside the reactor core.

In both aircraft and spacecraft, integration of a subassembly's components is most often effected in black boxes.

Welds in as many as 249 cars may have been applied improperly in the vicinity of the fuel-tank straps, as well as near a subassembly close to the rear floorpan.

Maximum temperature of the core catcher plate evaluated for different core meltdown scenarios using these models showed that there is much higher heat removal potential for single tray in-vessel SFR core catcher compared to the design basis case of melting of 7 subassemblies under total instantaneous blockage of a subassembly.

Then several hypothetical blockage events in a single fuel subassembly (SA), starting from 50% of the nominal coolant flowrate to the Total Instantaneous Blockage (TIB) have been simulated.

An example of a typical subassembly for a transport aircraft is the rear fuselage section, which is itself composed of several segments.

Since local coolant temperature could go up high enough to reach a safety limit by the blockage disturbance in the subassembly, the MATRA-LMR-FB code was developed to analyze such blockage effect.