Sentence examples for in a stirrer from inspiring English sources

The mean dissipation in a stirrer can be calculated based on the following equation (Nguyen 1998) varepsilon = frac{P}{{m_ (5 where P is power input, and m is liquid mass.

In this article, the power characteristics of the novel cup-shaped-blade (CB) impellers were investigated by using the Newtonian fluid in a stirrer tank, considering the effects of shape parameters, angle of the blades, baffles, agitator speed and physical properties of working fluid.

The dihydroxylation was carried out in a clamped three necked round bottom flask equipped with a thermometer and a stirrer in a thermo-regulated water bath.

A 5.00 g coal sample, ground to pass a 425 μm sieve, was compacted around the rabble arm of a stirrer in a metal crucible with the help of the preparatory facility.

Adsorption was performed batchwise in Erlenmeyer flasks on a stirrer at 150 rpm under the following conditions: adsorbent loading, 0.5 15 g/l; anion initial concentration, 30 250 mg/l; and pH 4 8.

This suspension was stirred in a magnetic stirrer for 10 min and then subjected to sonication in a sonicator for 90 min.

The mixture was kept in an ultrasonic during the addition, and then was stirred in a magnetic stirrer (500 rpm) at room temperature for 48 h.

The performance of the structured catalysts has been investigated in a monolithic stirrer reactor under very mild conditions (60 °C and 1 atm).

Pectin solution (1 w/v%) was prepared by dissolving a known quantity of pectin in 50 ml deionized water with continuous stirring in a magnetic stirrer to form a transparent solution.

To confirm encapsulation of NG by PVA polymer, an aqueous solution of NaCl (10%%) electrolyte was added to Au-PVA nanofluid and mixed in a magnetic stirrer for 10 min.

The flow, mixing and mass transfer in a catalytic stirrer containing catalyst coated porous micro-fiber elements, based on a concept introduced by Moulijn, were studied in a lab-scale reactor with 13 samples of materials with fiber diameters from 8to3535 μm and porosity values between 0.60 and 0.90.