The two Zn foils (5 × 5 × 0.25 mm3) were put into the reaction solution in a parallel configuration with an interelectrode separation of 1 cm to apply a fixed electric potential of 3 V between the two Zn electrodes by using the electrochemical analyzer for the electrochemical deposition of ZnO nanostructures at room temperature.
Although Figure 1B shows the microcolumns arranged exclusively in a parallel configuration after the first selection round, it is also possible to use a serial configuration in later rounds.
NO2 adsorption on (BaO 2 clusters in a parallel configuration on the γ-Al2O3(1 0 0) surface is more stable than on dimers oriented in a perpendicular fashion.
The results revealed that the deposition of dense and thick uniform nanoplates was perpendicular and nucleated in a parallel configuration onto the longitudinal axes of the individual nanofibers during the treatment process.
In conventional practice, chilled water is distributed via chilled water networks (CHWNs) in parallel configuration to provide required air conditioning and/or equipment cooling in the heating, ventilating and air conditioning (HVAC) system.
In conventional design, heating medium is distributed to the heat exchangers in parallel configuration to provide the required heating.
In these three scenarios, we assume that two calibrated cameras in a parallel configuration setting and the same image plane (the most common camera configuration) are used to record an uneven bar structure (similar to the artistic gymnastics apparatus), as shown in Fig. 3 d. Figure 3 a c shows the front, side, and top view of the stereoscopic orthographic projection of the scene, respectively.
The active Doherty load modulation and power combining at the PA output are achieved by two transformers in a parallel configuration.
Exhaust gas and EGR heat sources have been recovered in a parallel configuration.
a, b, and c show the front, side, and top view of the stereoscopic orthographic projection of uneven bar structure viewed by two cameras in a parallel configuration setting as depicted in (d) Fig. 4 The outputs of different downsampling methods.
The electrode needles were inserted into a 10- μL aliquot of CNT suspensions mounted on an inverted optical microscope (IX71, Olympus, Shinjuku, Tokyo, Japan) and were arranged in a parallel configuration.
