Sentence examples for improvement of surface finish from inspiring English sources

The geometry of the electrode contributes the most to the improvement of surface finish.

The study did establish an improvement of surface finish of PCD from Ra = 0.55 μm, Rt = 4.5 μm to Ra = 0.29 μm, Rt = 1.6 μm within 15 25 min of polishing time along with significant reduction in surface defects.

This study showed that by varying acceleration voltages and the number of irradiation cycles (shots), that as well as an improvement of surface finish, repair of cracks induced by the EDM process is possible.

This paper uses ultrasonic energy to assist the dregs discharge in electrochemical finishing for the improvement of surface finish of large holes beyond traditional drilling, boring, rough turning, or extruding for die material during the polishing process.

The effects on surface topography and surface defects are different; the SEM images (Fig. 8) show a clear improvement of surface finish by increasing the machine power.

It can be observed from Fig. 3 that the changing law of surface roughness is opposite to that of temperature within the machined surface, which means that increase of workpiece surface temperature indicates the quick improvement of surface finish.

By this experimentation, more than 98% improvement on surface finish has been observed.

The rise in pulse-on time from 0.85μs to 1.25μs causes improvement in MRR and deterioration of surface finish.

Wire is also produced with many types of surface finish.

The knowledge of finishing forces acting during the MFAAF process is essential to understand the nature of surface finish produced.

Also we have investigated the influence of surface finish on friction and wear performance.